MaxiScan MS509 OBD2 Scanner

MaxiScan MS509 is a code reader that covered the vehicle GM,FORD,CHRYSLER,TOYOTA,HONDA,NISSAN,All other Asian and European since
1996 to now.
MaxiScan MS509 support the english language and it can prints data via your computer.Reads live pcm data stream!

MS509 Features & Benefits
Works on all 1996 & later OBD2 compliant US, European & Asian vehicles.
Easily determines the cause of the “Check Engine Light”.
Retrieves generic (P0, P2, P3, & U0) & manufacturer specific (P1, P3, and U1) codes.
Turns off Check Engine Light, clears codes & resets monitors.
Displays DTC definitions onscreen.
Views freeze frame data.
Displays monitor & I/M readiness status (emissions).
Identifies pending codes.
Reads live PCM data stream.
Displays live O2 sensor test data.
Graphs data – (1996 and newer).
Reads, stores & playbacks live sensor data.
Memory/battery backup for off-vehicle data review & analysis.
Performs modules present test.
Retrieves vehicle information (VIN, CID and CVN).
Supports CAN (Controller Area Network) & all other current OBD2 protocols.
Built-in OBD2 DTC lookup library.
Large easy-to-read backlit LCD screen.
Software upgradeable via internet.
Prints data via PC.

Launch Cresetter

Launch Cresetter can reset the automotive service lights. It has applied the latest Cortex-M3 32- bit processor, 2.8" color LCD display. You can use it to clear or reset the warning lights on the instrument cluster to eliminate the unnecessary warning after repairing the vehicle.

Launch Cresetter is used to reset Oil Lamp. And it has additional functions for special models:
a) Airbag ECU Reset
b) Brake pads Reset
c) Air filter indicator Reset
d) Spark plugs Reset
e) Maintenance interval set

Vehicle Coverage of Cresetter:

USA: GM ,FORD ,CHRYSLER
European :BENZ ,BMW, VW, AUDI, LANDLOVER, VOLVO, SAAB,OPEL, CITROEN, PEUGEOT ,SEAT,SKODA,
Asia:NISSAN,TOYOTA,MITSUBISHI,HONDA

Launch Cresetter Video:

For more Launch Scan Tools, please visit http://www.shopobd2.com/.

Launch BST-460 Battery System Tester

Launch BST-460 Battery System Tester supports Chinese/English/Russian. It is the most advanced conductance test technology. And it is suitable for 6V & 12V battery system and 12V & 24V starting and charging system detects.

Launch BST-460 Battery System Tester

Launch BST-460 is applicable to a variety of models, all kinds of batteries, and a variety of system mode. It can directly detected in the car without removing the battery. Besides, BST-460 can directly test the battery of the loss of electricity , bad cell battery.

Advantage of Launch BST-460 Battery Tester:

Simple, secure , fast , and accurate display test results ( the test takes about 3 seconds)
Eight lines with backlight LCD display and humane language prompted interface
Does not emit light , no heat , no discharge , no spark , no operating dangerous
Automatic temperature compensation function With ripple voltage test function Multi- language menu display
Removable replacement test line
Dedicated Kelvin test clip

Main Parameters:

1 Shell ABS anti - acid plastic,two-tone green rubber oil ;
2.128 * 64 dot matrix,large backlit display screen (3 inches ),adjustable backlight brightness LCD display ;
3 test standards,including the most commonly used battery standard in the world,such as CCA, BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB
4 Operating temperature:-20-60 ℃ (-4-140 ℉)

For detail introduction to Launch BST-460 Battery System Tester, please visit shopobd2.com.