MaxiScan MS509 can print data via your PC and read live PCM Data Stream. Now price $42.00 on shopobd2.com.
MS509 Updating Steps
1. Install MaxiLink in your computer.
You can find the MaxiLink setup program included in the CD. Install the MaxiLink in your PC and run the program.
You can find the MaxiLink setup program included in the CD. Install the MaxiLink in your PC and run the program.
2. Connect the MS509 to your PC with the cable included.
3. If the connection is fine, you will find the status bar at the top of MaxiLink window become green, showed as the image.
 |
| MS509 Scan Tool |
4. Click “Select File” on the MaxiLink window to locate the update file.
Note: There are two update files in this zip. Our MS509 had changed hardware design so
you would not know which one is the applicable one for you. Don’t worry just try one by
one. The one which works fine is the correct one.
Note: There are two update files in this zip. Our MS509 had changed hardware design so
you would not know which one is the applicable one for you. Don’t worry just try one by
one. The one which works fine is the correct one.
5. Click “Update” to begin updating your tool. When update is done, the MaxiLink will pop up a message.
6. Power off the tool then on again to finish the update.
没有评论:
发表评论