It is always the hot sell product used for Citreon cars. It's not
only a good car diagnostic tool for DIY,but also a good assistance
for professional car repairman.Lexia 3 30pin cable has its own
specifications.it's a Original diagnostic tool for Citroen and
it is also considered to be a Full function scanner.Besides,
it has a latest software with promotion price.
Compatible Vehicles of the Lexia 3 30pin cable covers
almost all the Citreon cars. C1,C2,C3,C4,C6,C8,C-CROSSER,
NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX are
available .But please pay attention,according to our customer's
experience,this item can not works good at C5 models.
It compatible with most Peugeot cars from 1995,but it can
It compatible with most Peugeot cars from 1995,but it can
not work good with Peugeot 307.If customer have this two
types of cars,please pay attention.please check with us first
before purchase.Diagnostics is performed via OBD-II connector
(which is located near steering wheel) or via manufacturer-specific
connector (only older cars, pre-2001).
As one of the best obd2 scan tool,Lexia 3 30pin cable has full functions.
Unlike other universal car scanner tools which only read fault codes,
Unlike other universal car scanner tools which only read fault codes,
this software performs nearly ALL the functions like the original
dealer diagnostic tool. Our diagnostic interface contains K-Line
multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM
and VPW).The following diagnostic functions are supported:
1.Read identification
Displays complete identification of control unit, e.g. part number,
Displays complete identification of control unit, e.g. part number,
2. software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete
Displays all stored and pending fault codes with complete
description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and
Detects all ECUs (electronic control units) installed in car and
reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage,
Program displays live Data like Engine Speed, Battery voltage,
Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in
graph
9 values at once, or full listing (all measured values). Logging to file is
also supported, which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump,
Actuator test activates particular actuator (e.g. turn on fuel pump,
lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
7.Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz,
Software requires at least Intel Celeron/Pentium III 400 MHz,
128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended)
and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
If customer requires, we can prepare ready to work PC.
As for language, English, German, French, Japanese, Russian, Spanish, Portuguese,
Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech are available.
没有评论:
发表评论